Imec Realizes 18.6% Efficient Perovskite Solar Cell


Solliance partners TNO, Imec/EnergyVille and the Eindhoven University of Technology, developed a 18.6% efficient perovskite solar cell.

Tandem technology offers an attractive way to increase the efficiency of commercial solar cells and modules. Four terminal tandem solar cells allow the implementation of solar cells based on the industry standards. They are very beneficial in combination with bifacial tandems (tandem solar cells that can produce electrical energy when illuminated on both its surfaces), and can readily achieve a total power generation density as high as 320 W/m².

The researchers from Imec, Solliance, TNO and the Eindhoven University of Technology have combined a four terminal tandem configuration with an efficient Panasonic crystalline silicon (c-Si) cell, demonstrating the power conversion efficiency of 28.7%.

For this breakthrough, the researchers develop an efficient and highly near infrared transparent perovskite solar cell with an efficiency of 18.6%. The developed perovskite solar cell was combined with different architectures of bottom solar cells and even with different cell technologies, which demonstrates the wide applicability of the 4-terminal tandem approach:

  • with a prototype c-Si Interdigitated Back Contact (IBC) Silicon Hetero Junction (SHJ) cell of Panasonic, a record tandem efficiency of 28.7% was obtained;
  • with a commercial c-Si Metal Wrap Through (MWT) SHJ cell of Choshu Industry and Co, developed by TNO, a tandem efficiency of 28.2% was obtained;
  • with a commercial c-Si Passivated Emitter and Rear Contact (PERC) cell of Solarlab Aiko Europe GmbH, a tandem efficiency of 27.7% was achieved;
  • with a band gap optimized flexible CIGS cell of MiaSolé, a record tandem efficiency of 27.0% was realized.

The lab scale perovskite solar cell has a size of 9 mm^2.

“This performance was achieved by tuning the opto-electrical properties of the perovskite solar cell to better match the optical properties of the bottom cell.” says Dr. Dong Zhang of TNO/Solliance. “Next, we determined the loss factors in the four terminal configuration and minimized these step by step.  Finally, we optimized the light management of the complete tandem device, in other words, we maximized light absorption in the tandem solar cell.”


 





Source link

We will be happy to hear your thoughts

Leave a reply

My Blog
Logo
Reset Password
Compare items
  • Total (0)
Compare
0